Vicks Servo Drive Taiwan Delta Drive for Injection Moulding Machine

Short Description:

Vicks Servo System Delta Drive Technical Data 460V Frame C D  E0 E3 E2 Model   Number  VFD-___VL43_-J 055A  075A 110A  150B 185B 220A  300B 370B 450B 550A  750A  Power   (kW) 5.5 7.5 11 15 18.5 22 30 37 45 55 75 Horsepower   (HP) 7.5 10 15 20 25 30 40 50 60 75 100 Output  Max. Current (A)   (continuous 60 seconds ) 21 27 36 46 58 62 102 124 155 187 255 Max.   Current (A) (continuous 20 seconds ) 25 32 42 54 68 78 120 146 182 220 300 Input   Current (A)  14 18 24 31 3...


  • Item Name : Delta Servo Drive
  • Power : Electric
  • Input Voltage Tolerance : 3-phase 380-480V, 50-60Hz
  • Control Method : SVPWM
  • Speed Detector : Resolver
  • Over temperature : Bulit in Temperature Sensor
  • Opearting temperaure : -10℃ -45℃
  • Certification : CE
  • Place of Origin : Ningbo, China
  • Deilvery : 7-15days
  • Product Detail

    Product Tags

    Vicks Servo System Delta Drive

    Drive.png

    Technical Data

    460V Frame C E0 E3 E2
    Model   Number  VFD-___VL43_-J 055A  075A 110A  150B 185B 220A  300B 370B 450B 550A  750A 
    Power   (kW) 5.5 7.5 11 15 18.5 22 30 37 45 55 75
    Horsepower   (HP) 7.5 10 15 20 25 30 40 50 60 75 100
    Output  Max. Current (A)   (continuous 60 seconds ) 21 27 36 46 58 62 102 124 155 187 255
    Max.   Current (A) (continuous 20 seconds ) 25 32 42 54 68 78 120 146 182 220 300
    Input   Current (A)  14 18 24 31 39 47 56 67 87 101 122
    Power  Input Voltage   Tolerance  3-Phase 380~480V, 50/60   Hz
    Mains   Voltage Tolerance  ±10% (342-528V) 
    Mains   Frequency Tolerance  ±5% (47-63Hz) 
    Weight (kg)  8 10 10 10 10 13 13 28 36 50 50
    General   Specifications Control Method  SVPWM
    Speed   Detector  Resolver
    Speed   Input Command  DC 0~10V, support 3-point   adjustment for analog inputs 
    Pressure   Input Command  DC 0~10V, support 3-point   adjustment for analog inputs 
    Pressure   Feedback Command  DC 0~10V
    General   Input Signal  5 ch DC24V 8mA 
    General   Output Signal  2 ch DC24V 50mA, 1 ch   Relay output 
    Analog   Output Voltage  1 ch dc 0~10V 
    Optional Accessories  Speed Feedback PGA   Card  Necessary   (EMVJ-PG01R) 
    Brake   Resistor  Necessary (refer to   appendix A) 
    Pressure   Sensor  Necessray,   only pressure sensors with output signal 0~10V can be used ( max. pressure   value can be set by Pr. 00~08) 
    EMI   Filter  Optional ( refer to   Appendix A) 
    Protections  Motor Protection Electronic thremal relay   protection 
    Over-current  300% of rated   current 
    Ground   leakage current Higher than 50% rated   current 
    Voltage   Protection Over-voltage Level: Vdc>400/800V; Low-voltage Level: Vdc<200/400V
    Mains   Input Over-Voltage Varistor (MOV)
    Over-temperature  Built-in Temperature   Sensor 
    Environment  Protection Level  NEMA 1/IP20
    Operation   Temperature  -10℃~45℃
    Storage   Temperature  -20℃~60℃
    Humidity  90% RH   (non-condensing) 
    Vibration  1.0G 20Hz, 20~60Hz 0.6G <20Hz: 1.0G, 20 to 60 Hz: 0.6G 
    Cooling   System  (RUN, STOP) Force cooling   (RUN, STOP)
    Installation   Location Altitude 1,000m or lower   (keep away from corrosive gasses, liquid and dust) 
    Certifications CE

    Note: Bulit in brake chopper for models 22kw and below


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !