Short Lead Time for T7 Series Single pumps Supply to Mauritania
Short Lead Time for T7 Series Single pumps Supply to Mauritania Detail:
High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery.
Features
1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3.As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.
| NO. | Part | Qty | NO. | Part | Qty | NO. | Part | Qty |
| 1 | Shaft | 1 | 5 | Cir Clip For Shaft | 2 | 9 | Cartridge Kit | 1 |
| 2 | Straight Key | 1 | 6 | Ball Bearing | 1 | 10 | Rear Cover | 1 |
| 3 | Front Cover | 1 | 7 | Cir Clip For Hole | 1 | 11 | Hexagon Head Bolt | 4 |
| 4 | Shaft Seal | 1 | 8 | Rectangle Seal Ring | 1 |
< Model Designation
| T7B | S | -B10 | -1 | R | 00 | -A | 1 | 01 |
| Series | Type Code | Flow code | Shaft type |
Rotation | Port positions | Design number |
Sealing Level |
Port dimensions |
| T7B |
NO: ISO 3019 Installation Flange S: SAE J744 installation flange |
B02、B03、B04、B05、 B06、B07、B08、B10、 B12、B15 |
See of shaft | (Views from shaft end of pump) R-right hand for clockwise L-left hand for counter-clockwise |
(Views from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90°CCW from inlet 03-90°CW from inlet |
A | 1-S1, NBR Nitrile rubber 5-S5, Fluororubber |
See installation dimensions |
| T7D | B14、B17、B20、B22、 B24、B28、B31、B35、 B38、B42 |
NO | ||||||
| T7E | 042、045、050、052、 054、057、062、066、 072、085 |
|||||||
| T6C | NO: industrial type M: truck type P: truck type double seal kits |
003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 | ||||||
| T6D | 014/B14、017/B17、020/B20、024/B24、028/B28、031/B31、035/B35、038/B38、042/B42、045/B45、050/B50、061 | |||||||
| T6E | 042、045、050、052、 057、062、066、072、085 |
003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate structure.
< Technical Data
| Series | Flow code (Usgpm) |
Geometric displace-ment mL/r | Max. pressure Mpa | Max. speed r/min | Min. speed r/min | ||||||
| Antiwear hydraulic oil |
Genneral hydraulic oil or phosphate eater fluid | Water glycol fluid or water-oil emulsions |
Genneral hydraulic oil or phosphate eater fluid or antiwear hydraulic oil |
Water glycol fluid or phosphate eater fluid or water-oil emulsions |
|||||||
| Instant | Continuous | Instant | Continuous | Instant | Continuous | ||||||
| T7B(S) | B02 | 5.8 | 35 | 32 | 24 | 21 | 17.5 | 14 | 3600 | 1800 | 600 |
| B03 | 9.8 | ||||||||||
| B04 | 12.8 | ||||||||||
| B05 | 15.9 | ||||||||||
| B06 | 19.8 | ||||||||||
| B07 | 22.5 | ||||||||||
| B08 | 24.9 | ||||||||||
| B10 | 31.8 | ||||||||||
| B12 | 41.0 | 30 | 27.5 | 3000 | |||||||
| B15 | 50.0 | 28 | 24 | ||||||||
| T7D(S) | B14 | 44.0 | 30 | 25 | 24 | 21 | 17.5 | 14 | 3000 | 1800 | 600 |
| B17 | 55.0 | ||||||||||
| B20 | 66.0 | ||||||||||
| B22 | 70.3 | ||||||||||
| B24 | 81.1 | ||||||||||
| B28 | 90.0 | ||||||||||
| B31 | 99.2 | ||||||||||
| B35 | 113.4 | 28 | 2800 | ||||||||
| B38 | 120.6 | ||||||||||
| B42 | 137.5 | 26 | 23 | 2500 | |||||||
| T7E(S) | 042 | 132.3 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2200 | 1800 | 600 |
| 045 | 142.4 | ||||||||||
| 050 | 158.5 | ||||||||||
| 052 | 164.8 | ||||||||||
| 054 | 171.0 | ||||||||||
| 57 | 183.3 | ||||||||||
| 062 | 196.7 | ||||||||||
| 066 | 213.3 | ||||||||||
| 072 | 227.1 | ||||||||||
| 085 | 268.7 | 9 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 2000 | |||
003/B03： In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
<Operation Performance
Using the anti-wear hydraulic oil, the oil viscosity 24cst.
| Series |
Geological Displacement mL/rev |
Rotation speed r/min |
Flow (L/min) | Input Power (KW) | ||||||||||||
| P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
|||
| L/min | L/min | L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | KW | KW | |||
| T7B(S)-B02 | 5.8 | 1000 | 5.8 | 4.9 | 4.2 | 3.3 | - | - | - | 0.2 | 0.9 | 1.7 | 2.5 | - | - | - |
| 1200 | 7.0 | 6.1 | 5.4 | 4.5 | 4.0 | - | - | 0.4 | 1.3 | 2.2 | 3.2 | 3.6 | - | - | ||
| 1500 | 8.7 | 7.8 | 7.1 | 6.2 | 5.7 | 5.2 | 4.7 | 0.6 | 1.7 | 2.8 | 4.0 | 4.5 | 5.2 | 5.9 | ||
| 1800 | 10.4 | 9.5 | 8.8 | 7.9 | 7.4 | 6.9 | 6.4 | 0.7 | 2.0 | 3.4 | 5.0 | 5.6 | 6.4 | 7.2 | ||
| T7B(S)-B03 | 9.8 | 1000 | 9.8 | 8.9 | 8.2 | 7.3 | 6.8 | 6.3 | 5.8 | 0.2 | 1.3 | 2.6 | 3.9 | 4.5 | 5.2 | 6.0 |
| 1200 | 11.8 | 10.9 | 10.2 | 9.3 | 8.8 | 8.3 | 7.8 | 0.4 | 1.8 | 3.3 | 4.9 | 5.5 | 6.4 | 7.3 | ||
| 1500 | 14.7 | 13.8 | 13.1 | 12.2 | 11.7 | 11.2 | 10.7 | 0.7 | 2.4 | 4.2 | 6.1 | 6.9 | 8.0 | 9.1 | ||
| 1800 | 17.6 | 16.7 | 16.0 | 15.1 | 14.6 | 14.1 | 13.6 | 0.8 | 2.8 | 5.1 | 7.5 | 8.5 | 9.7 | 11.0 | ||
| T7B(S)-B04 | 12.8 | 1000 | 12.8 | 11.9 | 11.2 | 10.3 | 9.8 | 9.3 | 8.8 | 0.2 | 1.7 | 3.3 | 5.0 | 5.7 | 6.6 | 7.6 |
| 1200 | 15.4 | 14.5 | 13.8 | 12.9 | 12.4 | 11.9 | 11.4 | 0.5 | 2.2 | 4.2 | 6.1 | 6.9 | 8.1 | 9.2 | ||
| 1500 | 19.2 | 18.3 | 17.6 | 16.7 | 16.2 | 15.7 | 15.2 | 0.7 | 2.9 | 5.3 | 7.7 | 8.7 | 10.1 | 11.5 | ||
| 1800 | 23.0 | 22.1 | 21.4 | 20.5 | 20.0 | 19.5 | 19.0 | 0.9 | 3.4 | 6.4 | 9.4 | 10.6 | 12.3 | 13.9 | ||
| T7B(S)-B05 | 15.9 | 1000 | 15.9 | 15.0 | 14.3 | 13.4 | 12.9 | 12.4 | 11.9 | 0.3 | 2.1 | 4.1 | 6.0 | 6.9 | 8.1 | 9.2 |
| 1200 | 19.1 | 18.2 | 17.5 | 16.6 | 16.1 | 15.6 | 15.1 | 0.5 | 2.7 | 5.0 | 7.4 | 8.4 | 9.8 | 11.2 | ||
| 1500 | 23.9 | 23.0 | 22.3 | 21.4 | 20.9 | 20.4 | 19.9 | 0.8 | 3.4 | 6.4 | 9.3 | 10.6 | 12.3 | 14.0 | ||
| 1800 | 28.6 | 27.7 | 27.0 | 26.1 | 25.6 | 25.1 | 24.6 | 0.9 | 4.1 | 7.7 | 11.3 | 12.8 | 14.9 | 16.9 | ||
| T7B(S)-B06 | 19.8 | 1000 | 19.8 | 18.9 | 18.2 | 17.3 | 16.8 | 16.3 | 15.8 | 0.3 | 2.5 | 5.0 | 7.4 | 8.5 | 9.9 | 11.3 |
| 1200 | 23.8 | 22.9 | 22.2 | 21.3 | 20.8 | 20.3 | 19.8 | 0.6 | 3.2 | 6.1 | 9.1 | 10.3 | 12.0 | 13.7 | ||
| 1500 | 29.7 | 28.8 | 28.1 | 27.2 | 26.7 | 26.2 | 25.7 | 0.8 | 4.1 | 7.7 | 11.4 | 12.9 | 15.0 | 17.1 | ||
| 1800 | 35.6 | 34.7 | 34.0 | 33.1 | 32.6 | 32.1 | 31.6 | 1.0 | 4.9 | 9.3 | 13.8 | 15.7 | 19.1 | 20.6 | ||
| T7B(S)-B07 | 22.5 | 1000 | 22.5 | 21.6 | 20.9 | 20.0 | 19.5 | 19.0 | 18.5 | 0.4 | 2.8 | 5.6 | 8.3 | 9.6 | 11.2 | 12.8 |
| 1200 | 27.0 | 26.1 | 25.4 | 24.5 | 24.0 | 23.5 | 23.0 | 0.6 | 3.6 | 6.9 | 10.2 | 11.6 | 13.5 | 15.4 | ||
| 1500 | 33.8 | 32.9 | 32.2 | 31.3 | 30.8 | 30.3 | 29.8 | 0.9 | 4.6 | 8.7 | 12.8 | 14.6 | 16.9 | 19.3 | ||
| 1800 | 40.5 | 39.6 | 38.9 | 38.0 | 37.5 | 37.0 | 36.5 | 1.1 | 5.5 | 10.5 | 15.5 | 17.6 | 20.4 | 23.2 | ||
| T7B(S)-B08 | 24.9 | 1000 | 24.9 | 24.0 | 23.3 | 22.4 | 21.9 | 21.4 | 20.9 | 0.4 | 3.1 | 6.2 | 9.2 | 10.5 | 12.3 | 14.0 |
| 1200 | 29.9 | 29.0 | 28.3 | 27.4 | 26.9 | 26.4 | 25.9 | 0.6 | 3.9 | 7.6 | 11.2 | 12.8 | 14.8 | 16.9 | ||
| 1500 | 37.4 | 36.5 | 35.8 | 34.9 | 34.4 | 33.9 | 33.4 | 0.9 | 5.0 | 9.5 | 14.1 | 16.0 | 18.6 | 21.2 | ||
| 1800 | 44.8 | 43.9 | 43.2 | 42.3 | 41.8 | 41.3 | 40.8 | 1.1 | 6.0 | 11.5 | 17.0 | 19.3 | 22.4 | 25.5 | ||
| T7B(S)-B10 | 31.8 | 1000 | 31.8 | 30.9 | 30.2 | 29.3 | 28.8 | 28.3 | 27.8 | 0.5 | 3.9 | 7.8 | 11.6 | 13.3 | 15.5 | 17.7 |
| 1200 | 38.2 | 37.3 | 36.6 | 35.7 | 35.2 | 34.7 | 34.2 | 0.7 | 4.9 | 9.5 | 14.1 | 16.1 | 18.7 | 21.4 | ||
| 1500 | 47.7 | 46.8 | 46.1 | 45.2 | 44.7 | 44.2 | 43.7 | 1.1 | 6.2 | 11.9 | 17.7 | 20.1 | 23.4 | 26.7 | ||
| 1800 | 57.2 | 56.3 | 55.6 | 54.7 | 54.2 | 53.7 | 53.2 | 1.3 | 7.4 | 14.4 | 21.3 | 24.3 | 28.2 | 32.1 | ||
| T7B(S)-B12 | 41.0 | 1000 | 41.0 | 40.1 | 39.4 | 38.5 | 38.0 | 37.5 | - | 0.6 | 5.0 | 9.9 | 14.8 | 17.0 | 19.8 | - |
| 1200 | 49.2 | 48.3 | 47.6 | 46.7 | 46.2 | 45.7 | - | 0.9 | 6.2 | 12.1 | 18.0 | 20.5 | 23.9 | - | ||
| 1500 | 61.5 | 60.6 | 59.9 | 59.0 | 58.5 | 58.0 | - | 1.2 | 7.8 | 15.2 | 22.5 | 25.7 | 29.9 | - | ||
| 1800 | 73.8 | 72.9 | 72.2 | 71.3 | 70.8 | 70.3 | - | 1.5 | 9.4 | 18.2 | 27.1 | 30.9 | 35.9 | - | ||
| T7B(S)-B15 | 50.0 | 1000 | 50.0 | 49.1 | 48.4 | 47.5 | 47.0 | 46.5 | - | 0.7 | 6.0 | 12.0 | 18.0 | 20.6 | 24.0 | - |
| 1200 | 60.0 | 59.1 | 58.4 | 57.5 | 57.0 | 56.5 | - | 1.0 | 7.4 | 14.6 | 21.7 | 24.8 | 28.9 | - | ||
| 1500 | 75.0 | 74.1 | 73.4 | 72.5 | 72.0 | 71.5 | - | 1.4 | 9.4 | 18.3 | 27.2 | 31.1 | 36.2 | - | ||
| 1800 | 90.0 | 89.1 | 88.4 | 87.5 | 87.0 | 86.5 | - | 1.7 | 11.3 | 22.0 | 32.8 | 37.4 | 43.5 | - | ||
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
| P=0 Mpa |
P=14 Mpa |
P=30 Mpa |
|||
| L/min | L/min | L/min | |||
| T7D(S)-B14 | 44.0 | 1000 | 44.0 | 37.4 | 29.9 |
| 1200 | 52.8 | 46.2 | 38.7 | ||
| 1500 | 66.0 | 59.4 | 51.9 | ||
| 1800 | 79.2 | 72.6 | 65.1 | ||
| T7D(S)-B17 | 55.0 | 1000 | 55.0 | 48.4 | 40.9 |
| 1200 | 66.0 | 59.4 | 51.9 | ||
| 1500 | 82.5 | 75.9 | 68.4 | ||
| 1800 | 99.0 | 92.4 | 84.9 | ||
| T7D(S)-B20 | 66.0 | 1000 | 66.0 | 59.4 | 51.9 |
| 1200 | 79.2 | 72.6 | 65.1 | ||
| 1500 | 99.0 | 92.4 | 84.9 | ||
| 1800 | 118.8 | 112.2 | 104.7 | ||
| T7D(S)-B22 | 70.3 | 1000 | 70.3 | 63.7 | 56.2 |
| 1200 | 84.4 | 77.8 | 70.3 | ||
| 1500 | 105.5 | 98.8 | 91.4 | ||
| 1800 | 126.5 | 119.9 | 112.4 | ||
| T7D(S)-B24 | 81.1 | 1000 | 81.1 | 74.5 | 67.0 |
| 1200 | 97.3 | 90.7 | 83.2 | ||
| 1500 | 121.7 | 115.1 | 107.6 | ||
| 1800 | 146.0 | 139.4 | 131.9 | ||
| T7D(S)-B28 | 90.0 | 1000 | 90.0 | 83.4 | 75.9 |
| 1200 | 108.0 | 101.4 | 93.9 | ||
| 1500 | 135.0 | 128.4 | 120.9 | ||
| 1800 | 162.0 | 155.4 | 147.9 | ||
| T7D(S)-B31 | 99.2 | 1000 | 99.2 | 92.6 | 85.1 |
| 1200 | 119.8 | 113.2 | 105.7 | ||
| 1500 | 148.8 | 142.2 | 134.7 | ||
| 1800 | 178.6 | 172.0 | 164.5 | ||
| T7D(S)-B35 | 113.4 | 1000 | 113.4 | 106.8 | - |
| 1200 | 136.1 | 129.5 | - | ||
| 1500 | 170.1 | 163.5 | - | ||
| 1800 | 204.1 | 197.5 | - | ||
| T7D(S)-B38 | 120.6 | 1000 | 120.6 | 114.0 | - |
| 1200 | 144.7 | 138.1 | - | ||
| 1500 | 180.9 | 174.3 | - | ||
| 1800 | 217.1 | 210.5 | - | ||
| T7D(S)-B42 | 137.5 | 1000 | 137.5 | 130.9 | - |
| 1200 | 165.0 | 158.4 | - | ||
| 1500 | 206.3 | 199.7 | - | ||
| 1800 | 247.5 | 240.9 | - | ||
<
| Series | Input Power (KW) | ||
| P=0.7 Mpa |
P=14 Mpa |
P=30 Mpa |
|
| KW | KW | KW | |
| T7D(S)-B14 | 1.5 | 16.6 | 34.2 |
| T7D(S)-B17 | 1.7 | 20.4 | 42.4 |
| T7D(S)-B20 | 1.9 | 24.3 | 50.7 |
| T7D(S)-B22 | 2.0 | 25.8 | 53.9 |
| T7D(S)-B24 | 2.2 | 29.5 | 62.0 |
| T7D(S)-B28 | 2.3 | 32.7 | 68.7 |
| T7D(S)-B31 | 2.5 | 35.9 | 75.6 |
| T7D(S)-B35 | 2.7 | 40.8 | - |
| T7D(S)-B38 | 2.9 | 43.4 | - |
| T7D(S)-B42 | 3.2 | 49.3 | - |
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
| P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|||
| L/min | L/min | L/min | |||
| T7E(S)-042 | 132.3 | 1000 | 132.3 | 122.3 | 115.2 |
| 1200 | 158.8 | 150.8 | 143.7 | ||
| 1500 | 198.5 | 188.5 | 181.4 | ||
| 1800 | 238.1 | 228.1 | 221.0 | ||
| T7E(S)-045 | 142.4 | 1000 | 142.4 | 132.4 | 125.3 |
| 1200 | 170.9 | 160.9 | 153.8 | ||
| 1500 | 213.6 | 203.6 | 196.5 | ||
| 1800 | 256.3 | 246.3 | 239.2 | ||
| T7E(S)-050 | 158.5 | 1000 | 158.5 | 158.5 | 141.4 |
| 1200 | 190.2 | 180.2 | 173.1 | ||
| 1500 | 237.7 | 227.7 | 220.6 | ||
| 1800 | 285.3 | 275.3 | 268.2 | ||
| T7E(S)-052 | 164.8 | 1000 | 164.8 | 154.8 | 147.7 |
| 1200 | 197.8 | 187.8 | 180.7 | ||
| 1500 | 247.2 | 237.2 | 230.1 | ||
| 1800 | 296.6 | 286.6 | 279.5 | ||
| T7E(S)-054 | 171.0 | 1000 | 171.0 | 161.0 | 153.9 |
| 1200 | 205.2 | 195.2 | 188.1 | ||
| 1500 | 256.5 | 246.5 | 239.4 | ||
| 1800 | 307.8 | 297.8 | 290.7 | ||
| T7E(S)-057 | 183.3 | 1000 | 183.3 | 173.3 | 166.2 |
| 1200 | 220.0 | 210.0 | 202.9 | ||
| 1500 | 275.0 | 265.0 | 257.9 | ||
| 1800 | 330.0 | 320.0 | 312.9 | ||
| T7E(S)-062 | 196.7 | 1000 | 196.7 | 186.7 | 179.6 |
| 1200 | 236.0 | 226.0 | 218.9 | ||
| 1500 | 295.0 | 285.0 | 277.9 | ||
| 1800 | 354.1 | 344.1 | 337.0 | ||
| T7E(S)-066 | 213.3 | 1000 | 213.3 | 203.3 | 196.2 |
| 1200 | 256.0 | 246.0 | 238.9 | ||
| 1500 | 319.9 | 309.0 | 302.8 | ||
| 1800 | 354.1 | 344.1 | 337.0 | ||
| T7E(S)-072 | 227.1 | 1000 | 227.1 | 217.1 | 210.0 |
| 1200 | 272.5 | 262.5 | 255.4 | ||
| 1500 | 340.6 | 330.6 | 323.5 | ||
| 1800 | 408.8 | 398.8 | 391.7 | ||
| T7E(S)-085* | 268.7 | 1000 | 268.7 | - | - |
| 1200 | 322.4 | - | - | ||
| 1500 | 403.0 | - | - | ||
| 1800 | 483.7 | - | - | ||
*85: The max rotation speed is 2000r/min, and the max intermittent pressure is 21MPa
<
| Series | Input Power (KW) | ||
| P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|
| KW | KW | KW | |
| T7E(S)-042 | 5.2 | 49.4 | 82.6 |
| T7E(S)-045 | 5.4 | 52.9 | 88.7 |
| T7E(S)-050 | 5.7 | 58.5 | 50.7 |
| T7E(S)-052 | 5.8 | 60.8 | 102.1 |
| T7E(S)-054 | 5.9 | 63 | 105.8 |
| T7E(S)-057 | 6.1 | 67.3 | 113.2 |
| T7E(S)-062 | 6.4 | 71.9 | 121.3 |
| T7E(S)-066 | 6.7 | 77.7 | 131.2 |
| T7E(S)-072 | 6.9 | 82.6 | 139.5 |
| T7E(S)-085 | 9.1 | - | - |
*85: The max rotation speed is 2000rpm/min, and the max intermittent pressure is 21Mpa
Installation Dimensions
| T7B | T7BS | T7D | T7DS | T7E | T7ES | T6C | T6D | T6E | |
| E | 38.1 | 38.1 | 38.1 | 38.1 | 52.3 | 52.3 | 38.1 | 38.1 | 52.3 |
| F | 82.3 | 82.3 | 87.4 | 87.4 | 110.0 | 110.0 | 82.3 | 87.4 | 110.0 |
| G | 168.5 | 168.5 | 184.9 | 184.9 | 225.3 | 225.3 | 161.6 | 184.9 | 225.3 |
| J1 | 100.0 | 101.6 | 125.0 | 127.0 | 125.0 | 127.0 | 101.6 | 127.0 | 127.0 |
| J2 | 99.967 | 101.55 | 124.937 | 126.095 | 124.937 | 129.095 | 101.55 | 126.095 | 126.095 |
| N | 140.0 | 146.0 | 180.0 | 181.0 | 180.0 | 181.0 | 146.1 | 181.0 | 181.0 |
| O | 174.5 | 174.5 | 212.4 | 212.4 | 213.0 | 231.0 | 174.5 | 212.4 | 213.0 |
| φP | 14.0 | 14.3 | 18.0 | 17.5 | 18.0 | 17.5 | 14.3 | 17.5 | 17.5 |
| Oil port | Flange | Install Dimensions(mm) | |||||||
| A1 | B1 | ∅C1 | D1 | T1 Thread | |||||
| T7B、T7BS | P | 01:3/4" | F06 | 22.2 | 47.6 | 19 | 76.2 | 3/8"-16UNCx19.0 | |
| 00:1" | F08 | 26.2 | 52.4 | 25.4 | |||||
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 1/2"-13UNCx22.4 | |||
| T7D、T7DS | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
| S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"-13UNCx23.9 | ||
| T7E、T7ES | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
| S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 | ||
| T6C | P | 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-15UNCx19.0 | |
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | ||
| T6D | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
| S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"13UNCx23.9 | ||
| T6E | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
| S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 | ||
<
| Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T7B | 2 | ● | 70.0 | 40.0 | 25.0065/24.9935 | 8.00×7.00 | 28.22 | - |
| T7BS | 1 | ● | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
| 3 | ● | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 13T | - | |||
| 4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 15T | - | |||
| T7D | 5 | ● | 87.4 | 50.0 | 32.018/32.002 | 10.000×8.00 | 35.3 | M10xx20 |
| T7DS | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
| 2 | ● | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | ||
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 77.7 | 48.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| T7E | 5 | ● | 90.0 | 60.0 | 38.018/38.002 | 10.00×8.00 | 41.3 | M10xx20 |
| T7ES | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | 9.52×9.47 | 42.36 | M10xx20 |
| 2 | ● | 61.9 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
| T6C | 1 | 275 | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
| 2 | 238 | 58.2 | 31.7 | 22.225/22.200 | 4.76×4.71 | 24.53 | - | |
| 3 | 343 | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 14T | - | |||
| 4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 17T | - | |||
| T6D | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
| 2 | 577 | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
| 3 | ● | 55.2 | 31.7 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 77.7 | 24.5 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| T6E | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | M10xx20 | ||
| 2 | 577 | 61.9 | 38.1 | 31.750/31.700 | - | |||
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
● work at maxmimum flow and pressure
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for Short Lead Time for T7 Series Single pumps Supply to Mauritania, The product will supply to all over the world, such as: New Delhi, Porto, Florida, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
By Giselle from Hamburg - 2018.02.08 16:45
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By King from Armenia - 2017.10.23 10:29
