Renewable Design for Vicks Servo Motor to Ecuador Manufacturer
Renewable Design for Vicks Servo Motor to Ecuador Manufacturer Detail:
Servo motor paramter table
Size | Nomin
altorque |
Locked-rotor torque |
Bases
peed |
Maximum
Speed |
Nomina
lCurrent |
Locked-rotor torque |
Nomina
lPower |
Torque
constat |
Nominal Frequncy |
Winding Resistance |
Winding Inductanle |
Nominal Voltage |
Interia withbrake Opeion |
||||
Nm | Nm | Rpm | Rpm | Arms | Arms | KW | Nm/Arms | Hz | Ohm | mH | V | Kgm210-3 | |||||
U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0.144 | 2.37 | 340 | 15 | ||||
U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2.322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2.154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 |
Note: 1. Max. speed: If you don’t use the flax-weakening control function, the max rotagig speed will be higwer 500rpm than rated speed. If you use the flax-weakening control function, the max. rotatig speed depends on the driue.
2. Pole Number: The pole number is 8 rooles frabove, it's 4 pairs of rodes.
Installation Size:
The motor's spindle wses the standard shaft coptic axis or with single bond axis. Internal splined shaft outer splined shaft or hollow shaft. The signal of encoder inside of motor's junction box uses PCB board, also can choose aerial socket. The motor installiy can choose flange or baseplate.
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for Renewable Design for Vicks Servo Motor to Ecuador Manufacturer, The product will supply to all over the world, such as: Provence, Detroit, Philippines, Our mission is "Provide Goods with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!
By Eden from Manila - 2018.06.18 19:26
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Jean Ascher from Bogota - 2018.09.21 11:01