Original Factory T6 Series Treble Pump for Swiss Importers
Loading...
Original Factory T6 Series Treble Pump for Swiss Importers Detail:
T6, T7 Series-pin Vane Pump
High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery.
Features
1. With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2. This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3. As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.
T6﹑T67﹑T7 Series- Treble pumps
< Model Designation
| T6DCC | (M) | -042 | -017 | -010 | -1 | R | 02 | -A | 1 | 01 |
| Series | Type Code |
Flow-shaft end Pump | Flow-mid pump | Flow-cover end pump | Shaft type |
Rotation | Port positions |
Design number |
Sealing Level |
Port dimensions |
| T67DBB | NO: industrial type
M: truck type
S: truck type, SAE SAE C J744 installation flange |
014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 |
See size of shaft |
(Views from shaft end of pump) R-right hand for clockwise L-left hand for counter-clockwise |
see picture below |
A |
1-S1 NBR Nitrile rubber 5-S5, Fluororubber |
NO |
| T67DCB | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | |||||||
| T6DCC | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 | 003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 |
00、01, See installation dimensions |
||||||
| T67DDB | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | NO | ||||||
| T6DDC | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 |
00、01, See installation dimensions |
||||||
| T67EDB | 042﹑045﹑050﹑ 052﹑057﹑062﹑ 066﹑072﹑085 |
014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | NO | ||||||
| T6EDC | 042﹑045﹑050﹑ 052﹑057﹑062﹑ 066﹑072﹑085 |
014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 |
00、01, See installation dimensions |
003/B03： In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
The data of relevant series, model are unanimous. Please see T6 series-single pumps data
Installation Dimensions
Shaft exttension
| Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T6DCC T67DBB T67DCB |
1 | 721 | 83.6 | 49.3 | 31.750/31.700 | 6.35×6.30 | 34.6 | - |
| 2 | 1108 | 89.7 | 50.8 | 38.100/38.075 | 9.52×9.47 | 42.4 | - | |
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 61.0 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
| T6DCC | 6 | ● | 76.0 | 48.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | ||
● work at maximum flow and pressure
| Oil port | Flange | Install Dimensions(mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Thread | ||||
| T67DBB T67DCB |
P1 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 |
| P2 | 1" | F08 | 26.2 | 52.4 | 25.4 | 101.6 | 3/8"-16UNCx19.0 | |
| P3 | 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 127 | 5/8"-11UNCx30.0 | |
| T6DCC | P1 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 |
| P2 | 1" | F08 | 26.2 | 52.4 | 25.4 | 101.6 | 3/8"-16UNCx19.0 | |
| P3 | 01: 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| 00: 1" | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 127 | 5/8"-11UNCx30.0 | |
Shaft extension
| Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T6DDC T67DDB(S) |
1 | 686 | 84.0 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10x20 |
| 2 | 1148 | 91.0 | 50.8 | 38.100/38.075 | 9.52×9.47 | 42.36 | M10x20 | |
| 5 | 883 | 84.0 | 60.0 | 34.900/34.850 | 7.94×7.89 | 38.42 | M10x20 | |
| 3 | 971 | 56.0 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 46.0 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
● work at maximum flow and pressure
| Oil port | Flange | Install Dimensions(mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Thread | ||||
| T67DDB(S) | P1 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 |
| P2 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16"-14UNCx24.0 | |
| P3 | 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8"-11UNCx30.0 | |
| T6DDC | P1 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 |
| P2 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16"-14UNCx24.0 | |
| P3 | 01: 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| 00: 1" | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8"-11UNCx30.0 | |
Shaft extension
| Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T67EDB﹑T6EDC﹑ T6EDCS |
1 | ● | 92.0 | 63.0 | 45h7 | 45h7 | 48.5 | M12x24 |
| T6EDCS | 2 | ● | 100.0 | 63.5 | 44.45/44.40 | 11.11×11.06 | 49.3 | 1/2-UNCx24 |
| 3 | ● | 75.0 | 48.8 | SAE J498b class1, Diametral pitch 8/16, 13T | - | |||
● work at maximum flow and pressure
| Oil port | Flange | Install Dimensions(mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Thread | ||||
| T67EDB | P1 | 1-1/2" | F12 | 35.7 | 69.9 | 37.1 | 139.7 | 1/2"-13UNCx30.0 |
| P2 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16"-14UNCx24.0 | |
| P3 | 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8"-11UNCx30.0 | |
| T6EDC T6EDCS |
P1 | 1-1/2" | F12 | 35.7 | 69.9 | 37.1 | 139.7 | 1/2"-13UNCx30.0 |
| P2 | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16"-14UNCx24.0 | |
| P3 | 01: 3/4" | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8"-16UNCx19.0 | |
| 00: 1" | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4" | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8"-11UNCx30.0 | |
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for Original Factory T6 Series Treble Pump for Swiss Importers, The product will supply to all over the world, such as: Salt Lake City, Sudan, Jamaica, Look forward to the future, we will focus more on the brand building and promotion . And in the process of our brand global strategic layout we welcome more and more partners join us, work together with us based on mutual benefit. Let's develop market by fully utilizing our comprehensive advantages and strive for building.
By Kevin Ellyson from Manchester - 2017.08.18 18:38
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Gill from Montpellier - 2017.11.11 11:41
Write your message here and send it to us
