OEM Manufacturer Vicks Servo Motor to Rome Manufacturer
OEM Manufacturer Vicks Servo Motor to Rome Manufacturer Detail:
Servo motor paramter table
| Size | Nomin
altorque |
Locked-rotor torque |
Bases
peed |
Maximum
Speed |
Nomina
lCurrent |
Locked-rotor torque |
Nomina
lPower |
Torque
constat |
Nominal Frequncy |
Winding Resistance |
Winding Inductanle |
Nominal Voltage |
Interia withbrake Opeion |
||||
| Nm | Nm | Rpm | Rpm | Arms | Arms | KW | Nm/Arms | Hz | Ohm | mH | V | Kgm210-3 | |||||
| U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
| U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
| U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
| U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
| U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
| U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
| U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
| U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
| U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
| U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
| U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
| U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
| U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
| U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
| U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
| U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
| U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
| U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0.144 | 2.37 | 340 | 15 | ||||
| U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
| U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2.322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
| U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
| U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2.154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
| U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
| U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
| U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
| U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
| U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
| U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
| U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 | ||||
Note: 1. Max. speed: If you don’t use the flax-weakening control function, the max rotagig speed will be higwer 500rpm than rated speed. If you use the flax-weakening control function, the max. rotatig speed depends on the driue.
2. Pole Number: The pole number is 8 rooles frabove, it's 4 pairs of rodes.
Installation Size:
The motor's spindle wses the standard shaft coptic axis or with single bond axis. Internal splined shaft outer splined shaft or hollow shaft. The signal of encoder inside of motor's junction box uses PCB board, also can choose aerial socket. The motor installiy can choose flange or baseplate.
Product detail pictures:


Related Product Guide:
Why every website owner needs Google Analytics
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for OEM Manufacturer Vicks Servo Motor to Rome Manufacturer, The product will supply to all over the world, such as: Argentina , Hyderabad , Mauritius , We will continue to devote ourselves to market & product development and build a well-knit service to our customer to create a more prosperous future. Please contact us today to find out how we can work together.
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.




