Manufactur standard Vicks Servo Motor Wholesale to Portugal
Manufactur standard Vicks Servo Motor Wholesale to Portugal Detail:
Servo motor paramter table
| Size | Nomin
altorque |
Locked-rotor torque |
Bases
peed |
Maximum
Speed |
Nomina
lCurrent |
Locked-rotor torque |
Nomina
lPower |
Torque
constat |
Nominal Frequncy |
Winding Resistance |
Winding Inductanle |
Nominal Voltage |
Interia withbrake Opeion |
||||
| Nm | Nm | Rpm | Rpm | Arms | Arms | KW | Nm/Arms | Hz | Ohm | mH | V | Kgm210-3 | |||||
| U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
| U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
| U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
| U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
| U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
| U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
| U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
| U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
| U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
| U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
| U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
| U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
| U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
| U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
| U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
| U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
| U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
| U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0.144 | 2.37 | 340 | 15 | ||||
| U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
| U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2.322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
| U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
| U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2.154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
| U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
| U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
| U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
| U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
| U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
| U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
| U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 | ||||
Note: 1. Max. speed: If you don’t use the flax-weakening control function, the max rotagig speed will be higwer 500rpm than rated speed. If you use the flax-weakening control function, the max. rotatig speed depends on the driue.
2. Pole Number: The pole number is 8 rooles frabove, it's 4 pairs of rodes.
Installation Size:
The motor's spindle wses the standard shaft coptic axis or with single bond axis. Internal splined shaft outer splined shaft or hollow shaft. The signal of encoder inside of motor's junction box uses PCB board, also can choose aerial socket. The motor installiy can choose flange or baseplate.
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
Our firm promises all consumers with the first-class products as well as most satisfying post-sale services. We warmly welcome our regular and new consumers to join us for Manufactur standard Vicks Servo Motor Wholesale to Portugal, The product will supply to all over the world, such as: Singapore , European , India , Please really feel free to send us your requirements and we'll respond to you asap. We have got a professional engineering group to serve for your just about every detailed needs. Cost-free samples could be sent for you personally to understand much more information. In an effort to meet your requires, please really feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd items. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is actually our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Victoria
from Belize
- 2018.11.11 19:52
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Jonathan
from Jamaica
- 2018.10.01 14:14
