High Quality for Vicks Servo Motor for Puerto Rico Importers
High Quality for Vicks Servo Motor for Puerto Rico Importers Detail:
Servo motor paramter table
| Size | Nomin
altorque |
Locked-rotor torque |
Bases
peed |
Maximum
Speed |
Nomina
lCurrent |
Locked-rotor torque |
Nomina
lPower |
Torque
constat |
Nominal Frequncy |
Winding Resistance |
Winding Inductanle |
Nominal Voltage |
Interia withbrake Opeion |
||||
| Nm | Nm | Rpm | Rpm | Arms | Arms | KW | Nm/Arms | Hz | Ohm | mH | V | Kgm210-3 | |||||
| U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
| U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
| U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
| U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
| U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
| U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
| U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
| U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
| U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
| U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
| U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
| U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
| U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
| U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
| U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
| U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
| U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
| U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0.144 | 2.37 | 340 | 15 | ||||
| U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
| U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2.322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
| U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
| U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2.154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
| U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
| U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
| U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
| U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
| U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
| U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
| U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 | ||||
Note: 1. Max. speed: If you don’t use the flax-weakening control function, the max rotagig speed will be higwer 500rpm than rated speed. If you use the flax-weakening control function, the max. rotatig speed depends on the driue.
2. Pole Number: The pole number is 8 rooles frabove, it's 4 pairs of rodes.
Installation Size:
The motor's spindle wses the standard shaft coptic axis or with single bond axis. Internal splined shaft outer splined shaft or hollow shaft. The signal of encoder inside of motor's junction box uses PCB board, also can choose aerial socket. The motor installiy can choose flange or baseplate.
Product detail pictures:


Related Product Guide:
Why every website owner needs Google Analytics
Responsible excellent and fantastic credit rating standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, buyer supreme" for High Quality for Vicks Servo Motor for Puerto Rico Importers, The product will supply to all over the world, such as: Sheffield , Georgia , Sweden , To win customers' confidence, Best Source has set up a strong sales and after-sales team to deliver the best product and service. Best Source abides by the idea of "Grow with customer" and philosophy of "Customer-oriented" to achieve cooperation of mutual trust and benefit. Best Source will always stand ready to cooperate with you. Let's grow together!
It is a very good, very rare business partners, looking forward to the next more perfect cooperation!




