factory Outlets for PV2R Series Double Vane Pump for New Zealand Factory
factory Outlets for PV2R Series Double Vane Pump for New Zealand Factory Detail:
Product Introduction
PV2R series of vane pumps with high pressure and lower noise are high-performance products, which are developed and domestically produced by our company, featured by advanced performance, reasonable structure, good creditability, lower noise, ultra-low pulse and stable quality and so on. Precisely made, the product can be used in the equipment with high precision and low noise, and is widely used in cutting, plastic, leather, forging and engineering machinery fields, and the like.
Specifications / Single pump
| Model | Displace ment (mL/r) |
Max. pressure (Mpa) | Speed (r/min) | Input power (kw) |
|||
| Special oil | Antiwear oil | Common oil | Min. | Max. | |||
| PV2R1-4 | 4.3 | 21 | 17.5 | 16 | 750 | 1800 | 2.1 |
| PV2R1-6 | 6.5 | 3.2 | |||||
| PV2R1-8 | 8.5 | 4.5 | |||||
| PV2R1-10 | 10.8 | 5.4 | |||||
| PV2R1-12 | 12.8 | 6.1 | |||||
| PV2R1-14 | 14.5 | 6.9 | |||||
| PV2R1-17 | 16.2 | 7.9 | |||||
| PV2R1-19 | 20.1 | 9.6 | |||||
| PV2R1-23 | 22.5 | 10.5 | |||||
| PV2R1-25 | 25.3 | 12.5 | |||||
| PV2R1-28 | 29.6 | 14.0 | |||||
| PV2R1-31 | 32.3 | 16 | 16 | 15.5 | |||
| PV2R2-26 | 25.3 | 21 | 17.5 | 14 | 600 | 1800 | 11.7 |
| PV2R2-33 | 32.3 | 15.5 | |||||
| PV2R2-41 | 39.8 | 18.9 | |||||
| PV2R2-47 | 49.8 | 23.2 | |||||
| PV2R2-53 | 51.5 | 24.0 | |||||
| PV2R2-59 | 55.8 | 24.9 | |||||
| PV2R2-65 | 63.7 | 29.4 | |||||
| PV2R2-70 | 70.3 | 16 | 1200 | 31.6 | |||
| PV2R2-79 | 78.1 | 35.7 | |||||
| PV2R2-85 | 82.7 | 37.5 | |||||
| PV2R3-52 | 51.5 | 21 | 17.5 | 14 | 600 | 1800 | 23.2 |
| PV2R3-60 | 63.7 | 29.4 | |||||
| PV2R3-66 | 66.6 | 34.2 | |||||
| PV2R3-76 | 75.5 | 37.7 | |||||
| PV2R3-94 | 89.5 | 41.2 | |||||
| PV2R3-116 | 118 | 16 | 16 | 1200 | 50.0 | ||
| PV2R3-125 | 122.2 | 59.9 | |||||
| PV2R3-136 | 136 | 66.7 | |||||
Note:
1. When pressure of pumps exceeds 16Mpa, with displacement of "4" "6" "8", speed should be more than 1450r/min.
2. Reduce the negative pressure of the inlet when the single pumps or double pumps with large displacement at high speed.
3. In use of synthetic hydraulic fluids and water containing hydraul fluids, limit the max speed at 1200r/min.
4. Noisiness is available in working conditions of 14Mpa and 1200r/min.
5. Input power is available in working condition of 16Mpa and 1500r/min.
| Series | Displacement of shaft end pump | Displacement of cover end pump | ||||||
| PV2R21 | 26、33、41、47、53、59、65 | 4、6、8、10、12、14、17、19、23、25、28、31 | ||||||
| PV2R31 | 52、60、66、76、94、116、125、136 | 4、6、8、10、12、14、17、19、23、25、28、31 | ||||||
| PV2R32 | 52、60、66、76、94、116、125、136 | 26、33、41、47、53、59、65 | ||||||
Port flange kits
| Flange model | Corresponding pipe specification |
Dimensions mm | ||||||||||
| C | D | E | F | H | J | L | N | Q | T | |||
| F04-A | 1/2" | 40 | 54 | 17.5 | 38.1 | 9.0 | 27 | Rc1/2" | - | - | 13 | |
| F04-B | - | 11 | 22.5 | |||||||||
| F06-A | 3/4' | 50.5 | 65.5 | 22.2 | 47.6 | 11.0 | 28 | Rc3/4" | - | - | 19 | |
| F06-B | - | 12 | 28.5 | |||||||||
| F08-A | 1" | 56 | 71 | 26.2 | 52.4 | 11.0 | 30 | Rc1" | - | - | 26 | |
| F08-B | - | 14 | 34.5 | |||||||||
| F10-A | 1-1/4" | 64.5 | 79.5 | 30.2 | 58.7 | 12.0 | 32 | Rc1-1/4" | - | - | 32 | |
| F10-B | - | 16 | 43 | |||||||||
| F12-A | 1-1/2" | 71 | 94 | 35.7 | 69.9 | 13.8 | 37 | Rc1-1/2" | - | - | 38 | |
| F12-B | - | 18 | 49.1 | |||||||||
| F16-A | 2" | 87.5 | 103 | 42.9 | 77.8 | 13.8 | 38 | Rc2" | - | - | 51 | |
| F16-B | - | 20 | 61 | |||||||||
| F20-A | 2-1/2" | 96 | 115 | 50.8 | 88.9 | 13.8 | 32 | Rc2-1/2" | - | - | 63 | |
| F20-B | - | 22 | 77.1 | |||||||||
| F24-A | 3" | 123 | 136 | 61.9 | 106.4 | 17.0 | 45 | Rc3" | - | - | 76 | |
| F24-B | - | 25 | 90 | |||||||||
| F28-A | 3-1/2" | 135 | 153 | 69.9 | 120.7 | 17.5 | 46 | Rc3-1/2" | - | - | 89 | |
| F28-B | - | 20 | 102.8 | |||||||||
| F32-A | 4" | 145 | 162 | 77.8 | 130.2 | 17.0 | 50 | Rc4" | - | - | 102 | |
| F32-B | 40 | - | 28 | 115.5 | ||||||||
| Flange model | O Ring GB3452.1-2005 |
PV2R Series | ||||
| socket head screw | Dimesions K | Corresponding oil pump interface |
||||
| F04-A | 21.2×2.65 | M8x30mm | 12.5 | PVR1 outlet, PV2R21, PV2R31 outlet of cover end pump |
||
| F04-B | ||||||
| F06-A | 30×3.55 | M10x30mm | 12.5 | PVR2 outlet, PV2R21 outlet of shaft end pump PV2R32 outlet of cover end pump |
||
| F06-B | ||||||
| F08-A | 34.5×3.55 | M10x35mm | 17 | PVR1 inlet port | ||
| F08-B | ||||||
| F10-A | 40×3.55 | M10x40mm | 19 | PVR2 inlet port, PV2R3 outlet, PV2R31, PV2R32 outlet of shaft end pump |
||
| F10-B | ||||||
| F12-A | 50×3.55 | - | - | - | ||
| F12-B | ||||||
| F16-A | 65×3.55 | M12x45mm | 17.5 | PVR3, PV2R21 inlet | ||
| F16-B | ||||||
| F20-A | 75×3.55 | - | - | - | ||
| F20-B | ||||||
| F24-A | 85×3.55 | M16x45mm | 16.5 | PVR31, PV2R32 inlet | ||
| F24-B | ||||||
| F28-A | 100×3.55 | - | - | - | ||
| F28-B | ||||||
| F32-A | 115×3.55 | - | - | - | ||
| F32-B | ||||||
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for factory Outlets for PV2R Series Double Vane Pump for New Zealand Factory, The product will supply to all over the world, such as: Angola , Nepal , Burundi , We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products and solutions for our customers.
By Jocelyn
from Jamaica
- 2018.02.21 12:14
The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
By Atalanta
from French
- 2017.12.31 14:53
