Factory making T7 Series Single pumps Supply to Bangladesh
Factory making T7 Series Single pumps Supply to Bangladesh Detail:
High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery.
Features
1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3.As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.
NO. | Part | Qty | NO. | Part | Qty | NO. | Part | Qty |
1 | Shaft | 1 | 5 | Cir Clip For Shaft | 2 | 9 | Cartridge Kit | 1 |
2 | Straight Key | 1 | 6 | Ball Bearing | 1 | 10 | Rear Cover | 1 |
3 | Front Cover | 1 | 7 | Cir Clip For Hole | 1 | 11 | Hexagon Head Bolt | 4 |
4 | Shaft Seal | 1 | 8 | Rectangle Seal Ring | 1 |
< Model Designation
T7B | S | -B10 | -1 | R | 00 | -A | 1 | 01 |
Series | Type Code | Flow code | Shaft type |
Rotation | Port positions | Design number |
Sealing Level |
Port dimensions |
T7B |
NO: ISO 3019 Installation Flange S: SAE J744 installation flange |
B02、B03、B04、B05、 B06、B07、B08、B10、 B12、B15 |
See of shaft | (Views from shaft end of pump) R-right hand for clockwise L-left hand for counter-clockwise |
(Views from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90°CCW from inlet 03-90°CW from inlet |
A | 1-S1, NBR Nitrile rubber 5-S5, Fluororubber |
See installation dimensions |
T7D | B14、B17、B20、B22、 B24、B28、B31、B35、 B38、B42 |
NO | ||||||
T7E | 042、045、050、052、 054、057、062、066、 072、085 |
|||||||
T6C | NO: industrial type M: truck type P: truck type double seal kits |
003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 | ||||||
T6D | 014/B14、017/B17、020/B20、024/B24、028/B28、031/B31、035/B35、038/B38、042/B42、045/B45、050/B50、061 | |||||||
T6E | 042、045、050、052、 057、062、066、072、085 |
003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate structure.
< Technical Data
Series | Flow code (Usgpm) |
Geometric displace-ment mL/r | Max. pressure Mpa | Max. speed r/min | Min. speed r/min | ||||||
Antiwear hydraulic oil |
Genneral hydraulic oil or phosphate eater fluid | Water glycol fluid or water-oil emulsions |
Genneral hydraulic oil or phosphate eater fluid or antiwear hydraulic oil |
Water glycol fluid or phosphate eater fluid or water-oil emulsions |
|||||||
Instant | Continuous | Instant | Continuous | Instant | Continuous | ||||||
T7B(S) | B02 | 5.8 | 35 | 32 | 24 | 21 | 17.5 | 14 | 3600 | 1800 | 600 |
B03 | 9.8 | ||||||||||
B04 | 12.8 | ||||||||||
B05 | 15.9 | ||||||||||
B06 | 19.8 | ||||||||||
B07 | 22.5 | ||||||||||
B08 | 24.9 | ||||||||||
B10 | 31.8 | ||||||||||
B12 | 41.0 | 30 | 27.5 | 3000 | |||||||
B15 | 50.0 | 28 | 24 | ||||||||
T7D(S) | B14 | 44.0 | 30 | 25 | 24 | 21 | 17.5 | 14 | 3000 | 1800 | 600 |
B17 | 55.0 | ||||||||||
B20 | 66.0 | ||||||||||
B22 | 70.3 | ||||||||||
B24 | 81.1 | ||||||||||
B28 | 90.0 | ||||||||||
B31 | 99.2 | ||||||||||
B35 | 113.4 | 28 | 2800 | ||||||||
B38 | 120.6 | ||||||||||
B42 | 137.5 | 26 | 23 | 2500 | |||||||
T7E(S) | 042 | 132.3 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2200 | 1800 | 600 |
045 | 142.4 | ||||||||||
050 | 158.5 | ||||||||||
052 | 164.8 | ||||||||||
054 | 171.0 | ||||||||||
57 | 183.3 | ||||||||||
062 | 196.7 | ||||||||||
066 | 213.3 | ||||||||||
072 | 227.1 | ||||||||||
085 | 268.7 | 9 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 2000 |
003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
<Operation Performance
Using the anti-wear hydraulic oil, the oil viscosity 24cst.
Series |
Geological Displacement mL/rev |
Rotation speed r/min |
Flow (L/min) | Input Power (KW) | ||||||||||||
P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
|||
L/min | L/min | L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | KW | KW | |||
T7B(S)-B02 | 5.8 | 1000 | 5.8 | 4.9 | 4.2 | 3.3 | - | - | - | 0.2 | 0.9 | 1.7 | 2.5 | - | - | - |
1200 | 7.0 | 6.1 | 5.4 | 4.5 | 4.0 | - | - | 0.4 | 1.3 | 2.2 | 3.2 | 3.6 | - | - | ||
1500 | 8.7 | 7.8 | 7.1 | 6.2 | 5.7 | 5.2 | 4.7 | 0.6 | 1.7 | 2.8 | 4.0 | 4.5 | 5.2 | 5.9 | ||
1800 | 10.4 | 9.5 | 8.8 | 7.9 | 7.4 | 6.9 | 6.4 | 0.7 | 2.0 | 3.4 | 5.0 | 5.6 | 6.4 | 7.2 | ||
T7B(S)-B03 | 9.8 | 1000 | 9.8 | 8.9 | 8.2 | 7.3 | 6.8 | 6.3 | 5.8 | 0.2 | 1.3 | 2.6 | 3.9 | 4.5 | 5.2 | 6.0 |
1200 | 11.8 | 10.9 | 10.2 | 9.3 | 8.8 | 8.3 | 7.8 | 0.4 | 1.8 | 3.3 | 4.9 | 5.5 | 6.4 | 7.3 | ||
1500 | 14.7 | 13.8 | 13.1 | 12.2 | 11.7 | 11.2 | 10.7 | 0.7 | 2.4 | 4.2 | 6.1 | 6.9 | 8.0 | 9.1 | ||
1800 | 17.6 | 16.7 | 16.0 | 15.1 | 14.6 | 14.1 | 13.6 | 0.8 | 2.8 | 5.1 | 7.5 | 8.5 | 9.7 | 11.0 | ||
T7B(S)-B04 | 12.8 | 1000 | 12.8 | 11.9 | 11.2 | 10.3 | 9.8 | 9.3 | 8.8 | 0.2 | 1.7 | 3.3 | 5.0 | 5.7 | 6.6 | 7.6 |
1200 | 15.4 | 14.5 | 13.8 | 12.9 | 12.4 | 11.9 | 11.4 | 0.5 | 2.2 | 4.2 | 6.1 | 6.9 | 8.1 | 9.2 | ||
1500 | 19.2 | 18.3 | 17.6 | 16.7 | 16.2 | 15.7 | 15.2 | 0.7 | 2.9 | 5.3 | 7.7 | 8.7 | 10.1 | 11.5 | ||
1800 | 23.0 | 22.1 | 21.4 | 20.5 | 20.0 | 19.5 | 19.0 | 0.9 | 3.4 | 6.4 | 9.4 | 10.6 | 12.3 | 13.9 | ||
T7B(S)-B05 | 15.9 | 1000 | 15.9 | 15.0 | 14.3 | 13.4 | 12.9 | 12.4 | 11.9 | 0.3 | 2.1 | 4.1 | 6.0 | 6.9 | 8.1 | 9.2 |
1200 | 19.1 | 18.2 | 17.5 | 16.6 | 16.1 | 15.6 | 15.1 | 0.5 | 2.7 | 5.0 | 7.4 | 8.4 | 9.8 | 11.2 | ||
1500 | 23.9 | 23.0 | 22.3 | 21.4 | 20.9 | 20.4 | 19.9 | 0.8 | 3.4 | 6.4 | 9.3 | 10.6 | 12.3 | 14.0 | ||
1800 | 28.6 | 27.7 | 27.0 | 26.1 | 25.6 | 25.1 | 24.6 | 0.9 | 4.1 | 7.7 | 11.3 | 12.8 | 14.9 | 16.9 | ||
T7B(S)-B06 | 19.8 | 1000 | 19.8 | 18.9 | 18.2 | 17.3 | 16.8 | 16.3 | 15.8 | 0.3 | 2.5 | 5.0 | 7.4 | 8.5 | 9.9 | 11.3 |
1200 | 23.8 | 22.9 | 22.2 | 21.3 | 20.8 | 20.3 | 19.8 | 0.6 | 3.2 | 6.1 | 9.1 | 10.3 | 12.0 | 13.7 | ||
1500 | 29.7 | 28.8 | 28.1 | 27.2 | 26.7 | 26.2 | 25.7 | 0.8 | 4.1 | 7.7 | 11.4 | 12.9 | 15.0 | 17.1 | ||
1800 | 35.6 | 34.7 | 34.0 | 33.1 | 32.6 | 32.1 | 31.6 | 1.0 | 4.9 | 9.3 | 13.8 | 15.7 | 19.1 | 20.6 | ||
T7B(S)-B07 | 22.5 | 1000 | 22.5 | 21.6 | 20.9 | 20.0 | 19.5 | 19.0 | 18.5 | 0.4 | 2.8 | 5.6 | 8.3 | 9.6 | 11.2 | 12.8 |
1200 | 27.0 | 26.1 | 25.4 | 24.5 | 24.0 | 23.5 | 23.0 | 0.6 | 3.6 | 6.9 | 10.2 | 11.6 | 13.5 | 15.4 | ||
1500 | 33.8 | 32.9 | 32.2 | 31.3 | 30.8 | 30.3 | 29.8 | 0.9 | 4.6 | 8.7 | 12.8 | 14.6 | 16.9 | 19.3 | ||
1800 | 40.5 | 39.6 | 38.9 | 38.0 | 37.5 | 37.0 | 36.5 | 1.1 | 5.5 | 10.5 | 15.5 | 17.6 | 20.4 | 23.2 | ||
T7B(S)-B08 | 24.9 | 1000 | 24.9 | 24.0 | 23.3 | 22.4 | 21.9 | 21.4 | 20.9 | 0.4 | 3.1 | 6.2 | 9.2 | 10.5 | 12.3 | 14.0 |
1200 | 29.9 | 29.0 | 28.3 | 27.4 | 26.9 | 26.4 | 25.9 | 0.6 | 3.9 | 7.6 | 11.2 | 12.8 | 14.8 | 16.9 | ||
1500 | 37.4 | 36.5 | 35.8 | 34.9 | 34.4 | 33.9 | 33.4 | 0.9 | 5.0 | 9.5 | 14.1 | 16.0 | 18.6 | 21.2 | ||
1800 | 44.8 | 43.9 | 43.2 | 42.3 | 41.8 | 41.3 | 40.8 | 1.1 | 6.0 | 11.5 | 17.0 | 19.3 | 22.4 | 25.5 | ||
T7B(S)-B10 | 31.8 | 1000 | 31.8 | 30.9 | 30.2 | 29.3 | 28.8 | 28.3 | 27.8 | 0.5 | 3.9 | 7.8 | 11.6 | 13.3 | 15.5 | 17.7 |
1200 | 38.2 | 37.3 | 36.6 | 35.7 | 35.2 | 34.7 | 34.2 | 0.7 | 4.9 | 9.5 | 14.1 | 16.1 | 18.7 | 21.4 | ||
1500 | 47.7 | 46.8 | 46.1 | 45.2 | 44.7 | 44.2 | 43.7 | 1.1 | 6.2 | 11.9 | 17.7 | 20.1 | 23.4 | 26.7 | ||
1800 | 57.2 | 56.3 | 55.6 | 54.7 | 54.2 | 53.7 | 53.2 | 1.3 | 7.4 | 14.4 | 21.3 | 24.3 | 28.2 | 32.1 | ||
T7B(S)-B12 | 41.0 | 1000 | 41.0 | 40.1 | 39.4 | 38.5 | 38.0 | 37.5 | - | 0.6 | 5.0 | 9.9 | 14.8 | 17.0 | 19.8 | - |
1200 | 49.2 | 48.3 | 47.6 | 46.7 | 46.2 | 45.7 | - | 0.9 | 6.2 | 12.1 | 18.0 | 20.5 | 23.9 | - | ||
1500 | 61.5 | 60.6 | 59.9 | 59.0 | 58.5 | 58.0 | - | 1.2 | 7.8 | 15.2 | 22.5 | 25.7 | 29.9 | - | ||
1800 | 73.8 | 72.9 | 72.2 | 71.3 | 70.8 | 70.3 | - | 1.5 | 9.4 | 18.2 | 27.1 | 30.9 | 35.9 | - | ||
T7B(S)-B15 | 50.0 | 1000 | 50.0 | 49.1 | 48.4 | 47.5 | 47.0 | 46.5 | - | 0.7 | 6.0 | 12.0 | 18.0 | 20.6 | 24.0 | - |
1200 | 60.0 | 59.1 | 58.4 | 57.5 | 57.0 | 56.5 | - | 1.0 | 7.4 | 14.6 | 21.7 | 24.8 | 28.9 | - | ||
1500 | 75.0 | 74.1 | 73.4 | 72.5 | 72.0 | 71.5 | - | 1.4 | 9.4 | 18.3 | 27.2 | 31.1 | 36.2 | - | ||
1800 | 90.0 | 89.1 | 88.4 | 87.5 | 87.0 | 86.5 | - | 1.7 | 11.3 | 22.0 | 32.8 | 37.4 | 43.5 | - |
<
Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
P=0 Mpa |
P=14 Mpa |
P=30 Mpa |
|||
L/min | L/min | L/min | |||
T7D(S)-B14 | 44.0 | 1000 | 44.0 | 37.4 | 29.9 |
1200 | 52.8 | 46.2 | 38.7 | ||
1500 | 66.0 | 59.4 | 51.9 | ||
1800 | 79.2 | 72.6 | 65.1 | ||
T7D(S)-B17 | 55.0 | 1000 | 55.0 | 48.4 | 40.9 |
1200 | 66.0 | 59.4 | 51.9 | ||
1500 | 82.5 | 75.9 | 68.4 | ||
1800 | 99.0 | 92.4 | 84.9 | ||
T7D(S)-B20 | 66.0 | 1000 | 66.0 | 59.4 | 51.9 |
1200 | 79.2 | 72.6 | 65.1 | ||
1500 | 99.0 | 92.4 | 84.9 | ||
1800 | 118.8 | 112.2 | 104.7 | ||
T7D(S)-B22 | 70.3 | 1000 | 70.3 | 63.7 | 56.2 |
1200 | 84.4 | 77.8 | 70.3 | ||
1500 | 105.5 | 98.8 | 91.4 | ||
1800 | 126.5 | 119.9 | 112.4 | ||
T7D(S)-B24 | 81.1 | 1000 | 81.1 | 74.5 | 67.0 |
1200 | 97.3 | 90.7 | 83.2 | ||
1500 | 121.7 | 115.1 | 107.6 | ||
1800 | 146.0 | 139.4 | 131.9 | ||
T7D(S)-B28 | 90.0 | 1000 | 90.0 | 83.4 | 75.9 |
1200 | 108.0 | 101.4 | 93.9 | ||
1500 | 135.0 | 128.4 | 120.9 | ||
1800 | 162.0 | 155.4 | 147.9 | ||
T7D(S)-B31 | 99.2 | 1000 | 99.2 | 92.6 | 85.1 |
1200 | 119.8 | 113.2 | 105.7 | ||
1500 | 148.8 | 142.2 | 134.7 | ||
1800 | 178.6 | 172.0 | 164.5 | ||
T7D(S)-B35 | 113.4 | 1000 | 113.4 | 106.8 | - |
1200 | 136.1 | 129.5 | - | ||
1500 | 170.1 | 163.5 | - | ||
1800 | 204.1 | 197.5 | - | ||
T7D(S)-B38 | 120.6 | 1000 | 120.6 | 114.0 | - |
1200 | 144.7 | 138.1 | - | ||
1500 | 180.9 | 174.3 | - | ||
1800 | 217.1 | 210.5 | - | ||
T7D(S)-B42 | 137.5 | 1000 | 137.5 | 130.9 | - |
1200 | 165.0 | 158.4 | - | ||
1500 | 206.3 | 199.7 | - | ||
1800 | 247.5 | 240.9 | - |
<
Series | Input Power (KW) | ||
P=0.7 Mpa |
P=14 Mpa |
P=30 Mpa |
|
KW | KW | KW | |
T7D(S)-B14 | 1.5 | 16.6 | 34.2 |
T7D(S)-B17 | 1.7 | 20.4 | 42.4 |
T7D(S)-B20 | 1.9 | 24.3 | 50.7 |
T7D(S)-B22 | 2.0 | 25.8 | 53.9 |
T7D(S)-B24 | 2.2 | 29.5 | 62.0 |
T7D(S)-B28 | 2.3 | 32.7 | 68.7 |
T7D(S)-B31 | 2.5 | 35.9 | 75.6 |
T7D(S)-B35 | 2.7 | 40.8 | - |
T7D(S)-B38 | 2.9 | 43.4 | - |
T7D(S)-B42 | 3.2 | 49.3 | - |
<
Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|||
L/min | L/min | L/min | |||
T7E(S)-042 | 132.3 | 1000 | 132.3 | 122.3 | 115.2 |
1200 | 158.8 | 150.8 | 143.7 | ||
1500 | 198.5 | 188.5 | 181.4 | ||
1800 | 238.1 | 228.1 | 221.0 | ||
T7E(S)-045 | 142.4 | 1000 | 142.4 | 132.4 | 125.3 |
1200 | 170.9 | 160.9 | 153.8 | ||
1500 | 213.6 | 203.6 | 196.5 | ||
1800 | 256.3 | 246.3 | 239.2 | ||
T7E(S)-050 | 158.5 | 1000 | 158.5 | 158.5 | 141.4 |
1200 | 190.2 | 180.2 | 173.1 | ||
1500 | 237.7 | 227.7 | 220.6 | ||
1800 | 285.3 | 275.3 | 268.2 | ||
T7E(S)-052 | 164.8 | 1000 | 164.8 | 154.8 | 147.7 |
1200 | 197.8 | 187.8 | 180.7 | ||
1500 | 247.2 | 237.2 | 230.1 | ||
1800 | 296.6 | 286.6 | 279.5 | ||
T7E(S)-054 | 171.0 | 1000 | 171.0 | 161.0 | 153.9 |
1200 | 205.2 | 195.2 | 188.1 | ||
1500 | 256.5 | 246.5 | 239.4 | ||
1800 | 307.8 | 297.8 | 290.7 | ||
T7E(S)-057 | 183.3 | 1000 | 183.3 | 173.3 | 166.2 |
1200 | 220.0 | 210.0 | 202.9 | ||
1500 | 275.0 | 265.0 | 257.9 | ||
1800 | 330.0 | 320.0 | 312.9 | ||
T7E(S)-062 | 196.7 | 1000 | 196.7 | 186.7 | 179.6 |
1200 | 236.0 | 226.0 | 218.9 | ||
1500 | 295.0 | 285.0 | 277.9 | ||
1800 | 354.1 | 344.1 | 337.0 | ||
T7E(S)-066 | 213.3 | 1000 | 213.3 | 203.3 | 196.2 |
1200 | 256.0 | 246.0 | 238.9 | ||
1500 | 319.9 | 309.0 | 302.8 | ||
1800 | 354.1 | 344.1 | 337.0 | ||
T7E(S)-072 | 227.1 | 1000 | 227.1 | 217.1 | 210.0 |
1200 | 272.5 | 262.5 | 255.4 | ||
1500 | 340.6 | 330.6 | 323.5 | ||
1800 | 408.8 | 398.8 | 391.7 | ||
T7E(S)-085* | 268.7 | 1000 | 268.7 | - | - |
1200 | 322.4 | - | - | ||
1500 | 403.0 | - | - | ||
1800 | 483.7 | - | - |
*85: The max rotation speed is 2000r/min, and the max intermittent pressure is 21MPa
<
Series | Input Power (KW) | ||
P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|
KW | KW | KW | |
T7E(S)-042 | 5.2 | 49.4 | 82.6 |
T7E(S)-045 | 5.4 | 52.9 | 88.7 |
T7E(S)-050 | 5.7 | 58.5 | 50.7 |
T7E(S)-052 | 5.8 | 60.8 | 102.1 |
T7E(S)-054 | 5.9 | 63 | 105.8 |
T7E(S)-057 | 6.1 | 67.3 | 113.2 |
T7E(S)-062 | 6.4 | 71.9 | 121.3 |
T7E(S)-066 | 6.7 | 77.7 | 131.2 |
T7E(S)-072 | 6.9 | 82.6 | 139.5 |
T7E(S)-085 | 9.1 | - | - |
*85: The max rotation speed is 2000rpm/min, and the max intermittent pressure is 21Mpa
Installation Dimensions
T7B | T7BS | T7D | T7DS | T7E | T7ES | T6C | T6D | T6E | |
E | 38.1 | 38.1 | 38.1 | 38.1 | 52.3 | 52.3 | 38.1 | 38.1 | 52.3 |
F | 82.3 | 82.3 | 87.4 | 87.4 | 110.0 | 110.0 | 82.3 | 87.4 | 110.0 |
G | 168.5 | 168.5 | 184.9 | 184.9 | 225.3 | 225.3 | 161.6 | 184.9 | 225.3 |
J1 | 100.0 | 101.6 | 125.0 | 127.0 | 125.0 | 127.0 | 101.6 | 127.0 | 127.0 |
J2 | 99.967 | 101.55 | 124.937 | 126.095 | 124.937 | 129.095 | 101.55 | 126.095 | 126.095 |
N | 140.0 | 146.0 | 180.0 | 181.0 | 180.0 | 181.0 | 146.1 | 181.0 | 181.0 |
O | 174.5 | 174.5 | 212.4 | 212.4 | 213.0 | 231.0 | 174.5 | 212.4 | 213.0 |
φP | 14.0 | 14.3 | 18.0 | 17.5 | 18.0 | 17.5 | 14.3 | 17.5 | 17.5 |
Oil port | Flange | Install Dimensions(mm) | |||||||
A1 | B1 | ∅C1 | D1 | T1 Thread | |||||
T7B、T7BS | P | 01:3/4" | F06 | 22.2 | 47.6 | 19 | 76.2 | 3/8"-16UNCx19.0 | |
00:1" | F08 | 26.2 | 52.4 | 25.4 | |||||
S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 1/2"-13UNCx22.4 | |||
T7D、T7DS | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"-13UNCx23.9 | ||
T7E、T7ES | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 | ||
T6C | P | 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-15UNCx19.0 | |
S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | ||
T6D | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"13UNCx23.9 | ||
T6E | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 |
<
Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
T7B | 2 | ● | 70.0 | 40.0 | 25.0065/24.9935 | 8.00×7.00 | 28.22 | - |
T7BS | 1 | ● | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
3 | ● | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 13T | - | |||
4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 15T | - | |||
T7D | 5 | ● | 87.4 | 50.0 | 32.018/32.002 | 10.000×8.00 | 35.3 | M10xx20 |
T7DS | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
2 | ● | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | ||
3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
4 | ● | 77.7 | 48.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
T7E | 5 | ● | 90.0 | 60.0 | 38.018/38.002 | 10.00×8.00 | 41.3 | M10xx20 |
T7ES | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | 9.52×9.47 | 42.36 | M10xx20 |
2 | ● | 61.9 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
T6C | 1 | 275 | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
2 | 238 | 58.2 | 31.7 | 22.225/22.200 | 4.76×4.71 | 24.53 | - | |
3 | 343 | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 14T | - | |||
4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 17T | - | |||
T6D | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
2 | 577 | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
3 | ● | 55.2 | 31.7 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
4 | ● | 77.7 | 24.5 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
T6E | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | M10xx20 | ||
2 | 577 | 61.9 | 38.1 | 31.750/31.700 | - | |||
3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - |
● work at maxmimum flow and pressure
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
"Quality very first, Honesty as base, Sincere assistance and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Factory making T7 Series Single pumps Supply to Bangladesh, The product will supply to all over the world, such as: Angola, Sydney, Latvia, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Judith from Cannes - 2017.08.18 11:04
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Julia from azerbaijan - 2018.09.21 11:44