Fabryk direkt Sina Parker Veljan Series T6 T7 Hydraulyske oaljevanepompferfanging 100% lykweardich en útwikselber
De kaai ta ús súkses is "Goede Merchandise Hege kwaliteit, ridlike kosten en effisjinte tsjinst" foar Fabriek direkt Sina Parker Veljan Series T6 T7 Hydraulic Oil Vane Pump Replacement 100% lykweardich en útwikselber, Wy ferwolkomje in klant om saken mei jo te dwaan en hoopje wille te hawwen yn it tafoegjen fan noch mear aspekten fan ús produkten.
De kaai ta ús súkses is "Goede merchandise fan hege kwaliteit, ridlike kosten en effisjinte tsjinst" foarSina Hydraulyske Vane Pomp, Veljan Vane PompWy ferwolkomje jo om ús bedriuw, fabryk en ús showroom te besykjen, dêr't ferskate items te sjen binne dy't oan jo ferwachtingen foldogge. Underwilens is it handich om ús webside te besykjen. Us ferkeappersoniel sil har bêst dwaan om jo de bêste tsjinst te leverjen. As jo mear ynformaasje nedich binne, nim dan gerêst kontakt mei ús op fia e-post of tillefoan.
T6, T7-searje-pin-vingepomp
Hege druk en hege prestaasjes dowelpin-type vanepompen wurde in soad brûkt foar plestikmasines, gietmasines, metallurgymasines, parsemasines, raffinaazjemasines, boumasines, marinemasines.
Funksjes
1. Mei de dowel pin-fanestruktuer kin it wurkje ûnder hege druk, leech lûd en lange libbensdoer
2. Dizze skoattelpomp kin passe by hydraulysk medium mei in brede viskositeit, en wurde by lege temperatuer starte en by hege temperatuer wurke.
3. Om't de skoattelpomp bilabiale skoattel oannimt, hat it hege oaljefersmoargingsbestriding en in breed snelheidsberik.
T6﹑T67﹑T7-searje - Treblepompen
< Modeloantsjutting
| T6DCC | (M) | -042 | -017 | -010 | -1 | R | 02 | -A | 1 | 01 |
| Searje | Type Koade | Pomp foar streamas ein | Flow-midpomp | Flow-cover einpomp | Skacht type | Rotaasje | Haven posysjes | Ûntwerp nûmer | Fersegeljen Peil | Haven ôfmjittings |
| T67DBB | NEE: yndustrieel type M: frachtweintype S: frachtweintype, SAE SAE C J744 ynstallaasje flange | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | Sjoch grutte fan skacht | (Utsichten fanút de skacht ein fan 'e pomp) L-linkerhân foar tsjin de klok yn | sjoch ôfbylding ûnder | A | 1-S1 NBR Nitril rubber | NO |
| T67DCB | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03, 005/B05, 006/B06, 008/B08, 010/B10, 012/B12, 014/B14, 017/B17, 020/B20, 022/B22, 025/B25, 028/B28, 031/B31 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | |||||||
| T6DCC | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03, 005/B05, 006/B06, 008/B08, 010/B10, 012/B12, 014/B14, 017/B17, 020/B20, 022/B22, 025/B25, 028/B28, 031/B31 | 003/B03, 005/B05, 006/B06, 008/B08, 010/B10, 012/B12, 014/B14, 017/B17, 020/B20, 022/B22, 025/B25, 028/B28, 031/B31 | 00.01, Sjoch ynstallaasje ôfmjittings | ||||||
| T67DDB | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | NO | ||||||
| T6DDC | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03, 005/B05, 006/B06, 008/B08, 010/B10, 012/B12, 014/B14, 017/B17, 020/B20, 022/B22, 025/B25, 028/B28, 031/B31 | 00.01, Sjoch ynstallaasje ôfmjittings | ||||||
| T67EDB | 042﹑045﹑050﹑ 052﹑057﹑062﹑ 066﹑072﹑085 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | B02﹑B03﹑B04﹑B05﹑B06﹑B07﹑B08﹑B10﹑B12﹑B15 | NO | ||||||
| T6EDC | 042﹑045﹑050﹑ 052﹑057﹑062﹑ 066﹑072﹑085 | 014/B14﹑017/B17﹑020/B20﹑024/B24﹑028/B28﹑031/B31﹑035/B35﹑038/B38﹑042/B42﹑045/B45﹑050/B50﹑061 | 003/B03, 005/B05, 006/B06, 008/B08, 010/B10, 012/B12, 014/B14, 017/B17, 020/B20, 022/B22, 025/B25, 028/B28, 031/B31 | 00.01, Sjoch ynstallaasje ôfmjittings |
003/B03: Yn ferpleatsingskoade betsjut 0 in struktuer mei ien stjoerklepplaat, B betsjut de struktuer mei twa stjoerkleppen.
De gegevens fan relevante searjes, modellen binne unanym. Sjoch asjebleaft de gegevens fan T6-searjes - ienige pompen
Ynstallaasjeôfmjittings
Asferlinging
| Model | Skacht koade | Maksimum koppel (Nm) | L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T6DCC T67DBB T67DCB | 1 | 721 | 83.6 | 49.3 | 31.750/31.700 | 6.35×6.30 | 34.6 | - |
| 2 | 1108 | 89.7 | 50.8 | 38.100/38.075 | 9,52 × 9,47 | 42.4 | - | |
| 3 | ● | 55.2 | 38.0 | SAE J498b klasse 1, Diametrale steek 12/24, 14T | - | |||
| 4 | ● | 61.0 | 31.5 | SAE J498b klasse 1, Diametrale steek 12/24, 17T | - | |||
| T6DCC | 6 | ● | 76.0 | 48.0 | SAE J498b klasse 1, Diametrale steek 12/24, 14T | - | ||
● wurkje by maksimale stream en druk
| Oaljehaven | Flens | Ynstallearje ôfmjittings (mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Tried | ||||
| T67DBB T67DCB | P1 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16″-14UNCx22.3 |
| P2 | 1″ | F08 | 26.2 | 52.4 | 25.4 | 101.6 | 3/8″-16UNCx19.0 | |
| P3 | 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 127 | 5/8″-11UNCx30.0 | |
| T6DCC | P1 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16″-14UNCx22.3 |
| P2 | 1″ | F08 | 26.2 | 52.4 | 25.4 | 101.6 | 3/8″-16UNCx19.0 | |
| P3 | 01: 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| 00: 1″ | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 127 | 5/8″-11UNCx30.0 | |
Asferlinging
| Model | Skacht koade | Maksimum koppel (Nm) | L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T6DDC T67DDB(S) | 1 | 686 | 84.0 | 49.3 | 31.750/31.700 | 7,94 × 7,89 | 35.27 | M10x20 |
| 2 | 1148 | 91.0 | 50.8 | 38.100/38.075 | 9,52 × 9,47 | 42.36 | M10x20 | |
| 5 | 883 | 84.0 | 60.0 | 34.900/34.850 | 7,94 × 7,89 | 38.42 | M10x20 | |
| 3 | 971 | 56.0 | 38.0 | SAE J498b klasse 1, Diametrale steek 12/24, 14T | - | |||
| 4 | ● | 46.0 | 31.5 | SAE J498b klasse 1, Diametrale steek 12/24, 17T | - | |||
● wurkje by maksimale stream en druk
| Oaljehaven | Flens | Ynstallearje ôfmjittings (mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Tried | ||||
| T67DDB(S) | P1 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16″-14UNCx22.3 |
| P2 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16″-14UNCx24.0 | |
| P3 | 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8″-11UNCx30.0 | |
| T6DDC | P1 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16″-14UNCx22.3 |
| P2 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16″-14UNCx24.0 | |
| P3 | 01: 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| 00: 1″ | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8″-11UNCx30.0 | |
Asferlinging
| Model | Skacht koade | Maksimum koppel (Nm) | L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T67EDB﹑T6EDC﹑ T6EDCS | 1 | ● | 92.0 | 63.0 | 45h7 | 45h7 | 48.5 | M12x24 |
| T6EDCS | 2 | ● | 100.0 | 63.5 | 44.45/44.40 | 11.11×11.06 | 49.3 | 1/2-UNCx24 |
| 3 | ● | 75.0 | 48.8 | SAE J498b klasse 1, Diametrale steek 8/16, 13T | - | |||
● wurkje by maksimale stream en druk
| Oaljehaven | Flens | Ynstallearje ôfmjittings (mm) | ||||||
| A1 | B1 | ∅C1 | D1 | T1 Tried | ||||
| T67EDB | P1 | 1-1/2″ | F12 | 35.7 | 69.9 | 37.1 | 139.7 | 1/2″-13UNCx30.0 |
| P2 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16″-14UNCx24.0 | |
| P3 | 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8″-11UNCx30.0 | |
| T6EDC T6EDCS | P1 | 1-1/2″ | F12 | 35.7 | 69.9 | 37.1 | 139.7 | 1/2″-13UNCx30.0 |
| P2 | 1-1/4″ | F10 | 30.2 | 58.7 | 31.8 | 101.6 | 7/16″-14UNCx24.0 | |
| P3 | 01: 3/4″ | F06 | 22.2 | 47.6 | 19.0 | 74.7 | 3/8″-16UNCx19.0 | |
| 00: 1″ | F08 | 26.2 | 52.4 | 25.4 | 74.7 | |||
| S | 4″ | F32 | 77.8 | 130.2 | 101.6 | 115.0 | 5/8″-11UNCx30.0 | |
