Vicks Servo Motor

Short Description:

Servo motor paramter table Size Nomin altorque Locked-rotor torque Bases peed Maximum Speed Nomina lCurrent Locked-rotor torque Nomina lPower Torque constat Nominal Frequncy Winding Resistance Winding Inductanle Nominal Voltage Interia withbrake Opeion Nm Nm Rpm Rpm Arms Arms KW Nm/Arms Hz Ohm mH V Kgm210-3 U1004F.15.3 38 39 1500 1950 11.6 12 6 3.32 100 1.67 16.33 350 6 U1004F.17.3 38.9 40.4 1700 2150 15.2 15.8 7.6 2.81 113.4 1.19 16 381 6 ...


  • Item Name : Vicks Servo Motor
  • Power : Electric
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • Product Detail

    Product Tags

    Servo motor paramter table

    Size Nomin

    altorque

    Locked-rotor

    torque

    Bases

    peed

    Maximum

    Speed

    Nomina

    lCurrent

    Locked-rotor

    torque

    Nomina

    lPower

    Torque

    constat

    Nominal

    Frequncy

    Winding

    Resistance

    Winding

    Inductanle

    Nominal

    Voltage

    Interia

    withbrake

    Opeion


    Nm Nm Rpm Rpm Arms Arms KW Nm/Arms Hz Ohm mH V Kgm210-3
    U1004F.15.3 38 39 1500 1950 11.6 12 6 3.32 100 1.67 16.33 350 6
    U1004F.17.3 38.9 40.4 1700 2150 15.2 15.8 7.6 2.81 113.4 1.19 16 381 6
    U1004F.20.3 42 44 2000 2450 18.8 19.6 8.7 2.37 133.4 0.85 8.33 321 6
    U1005F.15.3 55 60.7 1500 1950 16.6 20.2 8.6 3.31 100 0.97 14.6 300 6.1
    U1005F.17.3 57 59.5 1700 2150 20.4 23.3 10 2.81 113.4 0.72 10.6 336 6.1
    U1005F.20.3 58 60.7 2000 2450 24.3 25.7 12 2.6 133.4 0.6 9 364 6.1
    U1007F.15.3 74 81.6 1500 1950 23.9 26.5 11.6 3.37 100 0.665 11.4 329 9
    U1007F.17.3 80 83 1700 2150 28.2 31.8 14 2.85 113.4 0.48 8.09 341 9
    U1007F.20.3 87 92 2000 2450 36.7 38.3 18.2 2.53 133.4 0.356 4.74 341 9
    U1008F.15.3 103 106.1 1500 1950 33.2 34.6 16.4 3.38 100 0.473 9.05 370 9.8
    U1008F.17.3 96.2 99.6 1700 2150 35.1 36.8 17.6 2.98 113.4 0.417 7.04 370 9.8
    U1008F.20.3 95.6 99.6 2000 2450 40.1 42.5 20.4 2.58 133.4 0.314 5.29 370 9.8
    U1010F.15.3 128 130.2 1500 1950 41 42.9 20 3.3 100 0.338 7.38 360 12
    U1010F.17.3 122 126.6 1800 2250 44 48.7 23 2.87 120 0.273 5.42 312 12
    U1010F.20.3 135 139 2000 2450 60.5 61.8 28.3 2.37 133.4 0.181 2.78 321 12
    U1013F.15.3 186 190 1500 1950 61 63.8 29 3.26 100 0.249 3.7 370 15
    U1013F.17.3 164.1 169.5 1700 2150 55.4 58.5 28.7 3.19 113.4 0.236 5.03 380 15
    U1013F.20.3 175 185 2000 2450 73.7 77.3 36.7 2.53 133.4 0.144 2.37 340 15
    U1015F.15.3 220 225 1500 2000 72.73 80.93 37 3.096 100 0.18 4.029 370 19
    U1015F.20.3 215 223 2000 2500 96 106.8 49 2.322 133.4 0.103 2.266 371 19
    U1315F.15.3 196 198 1500 2000 71.48 72.51 31 3.015 100 0.169 6.458 378 27
    U1315F.20.3 191 196 2000 2500 97.76 100.2 43 2.154 133 0.089 3.295 380 27
    U1320F.15.3 210 210 1500 1950 62 62 33 3.43 100 0.098 4.46 369 36
    U1320F.17.3 229 236 1700 2150 92.6 98.3 39.4 2.94 113.4 0.107 4.5 377 36
    U1320F.18.3 232 240 1800 2250 96.46 99.8 44 2.64 120 0.085 3.647 379 36
    U1320F.20.3 269 286 2000 2450 120.7 127.8 56.3 2.37 133.4 0.068 2.13 347 36
    U1330F.15.3 380 416 1500 1950 106 117 60 3.56 100 0.082 3.19 280 49
    U1330F.17.3 349 363 1700 2150 145 153.4 62 2.89 113 0.06 2.9 268 49
    U1330F.20.3 389 417 2000 2450 155 166 81 2.67 133 0.046 1.8 286 49

    Note: 1. Max. speed: If you don’t use the flax-weakening control function, the max rotagig speed will be higwer 500rpm than rated speed. If you use the flax-weakening control function, the max. rotatig speed depends on the driue.

              2. Pole Number: The pole number is 8 rooles frabove, it's 4 pairs of rodes.

    Installation Size:

    The motor's spindle wses the standard shaft coptic axis or with single bond axis. Internal splined shaft outer splined shaft or hollow shaft. The signal of encoder inside of motor's junction box uses PCB board, also can choose aerial socket. The motor installiy can choose flange or baseplate.



  • Previous:
  • Next:

  • Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup